PRODUCTS
Automatic Height controller
MODEL
XPHTC-200DCPT, XPTHC-100V
FACTORY
KAOBO Machine
APPLICABLE MODELS
Plasma Cutting Machine
SHARE
- Features
- Product parameters
- Download
- leave a message
DESCRIPTION
1. Support Torch retaining cap IHS or Nozzle Contact (ohmic contact) IHS with any HF plasma…..Great anti-interference improvement.
2. PTHC has much higher accuracy than old XPTHCs, standard accuracy is 1V, enough to support HD plasmas. max support 12000mm/min cutting speed.
3. Support Dynamic pierce, collision output to CNC.
2. PTHC has much higher accuracy than old XPTHCs, standard accuracy is 1V, enough to support HD plasmas. max support 12000mm/min cutting speed.
3. Support Dynamic pierce, collision output to CNC.
FEATURES
1. Auto Initial Height Sensing(IHS)
Torch Retaining Cap IHS( ohmic contact) and Proximity Switch IHS both available, Proximity Switch IHS is for cutting dirty/rusty workpiece, needing the Anti-Collision Fixture designed by HYD (breakaway kit ). It supports underwater cutting,too.
2. Anti-Collision Function
When torch tip touches workpiece, THC automatically lift torch up to IHS height to avoid crashing. It is effective both on Manual/Auto mode.
3. Freeze Auto Height Control on Corner Signal
XPTHC-300 would freeze Auto Mode on receiving corner signal from CNC system to avoid torch diving on Cycle start/end, corner turning.
4. Support DC/AC24V powersupply both
5. Dual speed during IHS, better torch tip protection, and 6 indicators to easy trouble-shooting. When it get problem, we can easily find the problem by the indicator's on/off state and make fast solution to customer.
6. THC sensitivity, torch retract height after cutting....many functions adjustable to user.
Torch Retaining Cap IHS( ohmic contact) and Proximity Switch IHS both available, Proximity Switch IHS is for cutting dirty/rusty workpiece, needing the Anti-Collision Fixture designed by HYD (breakaway kit ). It supports underwater cutting,too.
2. Anti-Collision Function
When torch tip touches workpiece, THC automatically lift torch up to IHS height to avoid crashing. It is effective both on Manual/Auto mode.
3. Freeze Auto Height Control on Corner Signal
XPTHC-300 would freeze Auto Mode on receiving corner signal from CNC system to avoid torch diving on Cycle start/end, corner turning.
4. Support DC/AC24V powersupply both
5. Dual speed during IHS, better torch tip protection, and 6 indicators to easy trouble-shooting. When it get problem, we can easily find the problem by the indicator's on/off state and make fast solution to customer.
6. THC sensitivity, torch retract height after cutting....many functions adjustable to user.
PORDUCT PARAMETERS
Powersupply：AC24V+10%，50Hz/60Hz or DC24V，18V~30V；
Support Motor：DC24V motor；
Drive mode：PWM；
Output current：1A-2A；
Output Watt：40W；
Work temperature：-10∽60℃；
Initial sense mode：Proximity switch IHS & Torch retaining cap IHS；
Voltage divide ratio：50:1；
Accuracy：±1V∽±2V，
Lifter speed：1m/min∽4 m/min（over 4m/min,please contact supplier） ；
Set arc voltage range：35V∽250V，adjustable；
Support Max cutting speed：12000mm/min.
DOWNLOAD
LEAVE A MESSAGE
-
TEL:+86-531-85862926 / +86-18354189302 -
EMAIL:feimaiboss@feimaicnc.com.cn -
FAX:+86-531- 88671786 -
ADDR:NO.50, Part 5, Times Headquarters Industrial park, Lanxiang Road, Tianqiao District , Jinan city
Copyright:2015-2017Jinan kaibo Machine Equipment Co., Ltd.